List of Standard and the Appropriate Equipment


List of Current Standards and the Appropriate Equipment for the Implementation.

Standard
Organization
Designation Title Product
Sales Number
Product Title Accessories required
ASTM ASTM C173 / C173M - 14 Standard Test Method for Air Content
of Freshly Mixed Concrete by the Volumetric Method
A-AV-1300 Meter James Instruments™
ASTM Volumetric Air Meter









ASTM ASTM C215 - 08 Standard Test Method for
Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
V-E-400 Emodumeter™
For Resonant Frequency Testing
Determining Young's Modulus(E)
and Poisson's Ratio









ASTM ASTM C231 / C231M - 10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method A-AB-1200 ASTM Type B Pressure Air Meter








ASTM
ASTM C597 - 09
Standard Test Method for
Pulse Velocity Through Concrete
V-C-400 Complete V-Meter MK IV™ System
includes Basic System, Software for PC uploads and Transducers


V-C-401 V-Meter MK IV™ System w/o Software, includes two 54 KHz Transducers

V-C-403 V-Meter MK IV™ Basic System
w/o Software & Transducers


V-C-404 V-Meter MK IV™
(includes Veelinx Software, but no Transducers)









ASTM ASTM C666 / C666M - 03(2008) Standard Test Method for
Resistance of Concrete to Rapid Freezing and Thawing
V-E-400 Emodumeter™
For Resonant Frequency Testing
Determining Young's Modulus(E)
and Poisson's Ratio









ASTM
ASTM C803 / C803M - 03(2010)
Standard Test Method for
Penetration Resistance of Hardened Concrete
Z-WP-1000
Windsor® HP Probe System
U-PRS-03 Case Of 75 Gold Probes & 75 Power Loads for Testing Lightweight Concrete
U-PRS-01 Case Of 75 Silver Probes & 75 Power Loads for Testing
Standard Density Concrete




Z-WP-534
Windsor® Probe Manual System
U-PRS-03 Case Of 75 Gold Probes & 75 Power Loads for Testing Lightweight Concrete
U-PRS-01 Case Of 75 Silver Probes & 75 Power Loads for Testing
Standard Density Concrete




W-P-2000 Windsor® Pin Test System W-P-1040 Box of 40 pins with gauge for Windsor® Pin System







ASTM
ASTM C805 / C805M - 13a
Standard Test Method for
Rebound Number of Hardened Concrete
W-M-250 Manual Rebound Hammer
Economical Strength Testing of Hardened Concrete






W-D-1500 Digital Rebound Hammer
Basic System






W-D-2000 Digital Rebound Hammer
Complete System






W-M-255 Low Impact Manual Rebound Hammer
Economical Strength Testing of Hardened Concrete
and Hardness Testing of Materials






W-D-1505 Low Impact Digital Rebound Hammer
Basic System






W-D-2005 Low Impact Digital Rebound Hammer
Complete System









ASTM
ASTM C876 - 09
Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete
C-CM-4000 Cor-Map® System Basic Half Cell System for
Locating Areas of Rebar Corrosion






C-CM-5000-CU Cor-Map II™ Advanced Half Cell Potential System for Locating Areas of Rebar Corrosion with Digital Mapping Feature








ASTM ASTM C918 / C918M - 13 Standard Test Method for Measuring
Early-Age Compressive Strength and Projecting Later-Age Strength
M-M-3056 M-Meter™ M-M-3009 Temperature Sensor For M-M-3056







ASTM ASTM C1074 - 11 Standard Practice for Estimating
Concrete Strength by the Maturity Method
M-M-3056 M-Meter™ M-M-3009 Temperature Sensor For M-M-3056







ASTM ASTM C1383 - 04(2010) Standard Test Method for Measuring
the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
V-V-100 Vu-Con® System
Impact Echo System
For Field Evaluation of Concrete Structures









ASTM ASTM C1583 / C1583M - 13 Standard Test Method for Tensile
Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
P-C-7300 James Bond Test ™ MK III For Testing Tensile
Strength of Overlays, and Overlayments
P-087-10701
-001
50mm ( 2") steel disk for the James Bond Test™ MK III
for testing of bond strength of two layer materials.







ASTM
ASTM D2845 - 08
Standard Test Method for Laboratory
Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
V-C-400 Complete V-Meter MK IV™ System
includes Basic System, Software for PC uploads and Transducers






V-C-401 V-Meter MK IV™ System w/o Software, includes two 54 KHz Transducers





V-C-403 V-Meter MK IV™ Basic System
w/o Software & Transducers






V-C-404 V-Meter MK IV™
(includes Veelinx Software, but no Transducers)









ASTM ASTM D4541-09 Standard Test Method for Pull-Off
Strength of Coatings Using Portable Adhesion Testers
P-C-7300 James Bond Test ™ MK III For Testing Tensile
Strength of Overlays, and Overlayments
P-087-10701
-001
50mm ( 2") steel disk for the James Bond Test™ MK III
for testing of bond strength of two layer materials.







ASTM ASTM D7234-21 Standard Test Method for Pull-Off
Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
P-C-7400 James Bond Test ™ MK IV For Testing Tensile
Strength of Overlays, and Overlayments









ASTM
ASTM D5873 - 14
Standard Test Method for
Determination of Rock Hardness by Rebound Hammer Method
W-M-250 Manual Rebound Hammer
Economical Strength Testing of Hardened Concrete






W-D-1500 Digital Rebound Hammer
Basic System






W-D-2000 Digital Rebound Hammer
Complete System






W-M-255 Low Impact Manual Rebound Hammer
Economical Strength Testing of Hardened Concrete
and Hardness Testing of Materials






W-D-1505 Low Impact Digital Rebound Hammer
Basic System






W-D-2005 Low Impact Digital Rebound Hammer
Complete System









ASTM ASTM D7438 - 13 Standard Practice for Field Calibration
and Application of Hand-Held Moisture Meters
T-M-170 Aquameter™ Moisture Meter for Concrete, Brick, Masonry, Wood and Other Construction Materials








ASTM
ASTM E494 - 10
Standard Practice for Measuring
Ultrasonic Velocity in Materials
V-C-400 Complete V-Meter MK IV™ System
includes Basic System, Software for PC uploads and Transducers






V-C-401 V-Meter MK IV™ System w/o Software, includes two 54 KHz Transducers





V-C-403 V-Meter MK IV™ Basic System
w/o Software & Transducers






V-C-404 V-Meter MK IV™
(includes Veelinx Software, but no Transducers)









ASTM ASTM F2659 - 10 Standard Guide for
Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
T-M-170 Aquameter™ Moisture Meter for Concrete, Brick, Masonry, Wood and Other Construction Materials








British Standards
BS1881-202:1986
Testing concrete. Recommendations for surface hardness testing by rebound hammer
W-M-250 Manual Rebound Hammer
Economical Strength Testing of Hardened Concrete






W-D-1500 Digital Rebound Hammer
Basic System






W-D-2000 Digital Rebound Hammer
Complete System






W-M-255 Low Impact Manual Rebound Hammer
Economical Strength Testing of Hardened Concrete
and Hardness Testing of Materials






W-D-1505 Low Impact Digital Rebound Hammer
Basic System






W-D-2005 Low Impact Digital Rebound Hammer
Complete System









British Standards
Testing concrete. Recommendations
on the use of electromagnetic covermeters
R-C-400 Rebarscope® Basic System for Rebar Location and Bar Size Determination





R-C-450 Rebarscope® Basic System for Rebar Location and Bar Size Determination w/ Rebarlinx Software





R-C-410 Rebarscope® Complete System for Rebar Location and Bar Size Determination





R-HR-8000 Mini R-Meter™ Economic System for Rebar Location





R-HR-8100 Mini R-Meter w/PC Software Economic System for Rebar Location








British Standards
BS 1881-207:1992
Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests
Z-WP-1000
Windsor® HP Probe System
U-PRS-03 Case Of 75 Gold Probes & 75 Power Loads for Testing Lightweight Concrete
U-PRS-01 Case Of 75 Silver Probes & 75 Power Loads for Testing
Standard Density Concrete




Z-WP-534
Windsor® Probe Manual System
U-PRS-03 Case Of 75 Gold Probes & 75 Power Loads for Testing Lightweight Concrete
U-PRS-01 Case Of 75 Silver Probes & 75 Power Loads for Testing
Standard Density Concrete




W-P-2000 Windsor® Pin Test System W-P-1040 Box of 40 pins with gauge for Windsor® Pin System







British Standards BS 1881-209:1990 Testing concrete. Recommendations for the measurement of dynamic modulus of elasticity V-E-400 Emodumeter™
For Resonant Frequency Testing
Determining Young's Modulus(E)
and Poisson's Ratio









British Standards
BS EN 12504-2:2001
Testing concrete in structures. Non-destructive testing. Determination of rebound number
W-M-250 Manual Rebound Hammer
Economical Strength Testing of Hardened Concrete






W-D-1500 Digital Rebound Hammer
Basic System






W-D-2000 Digital Rebound Hammer
Complete System









British Standards
BS EN 12504-4:2004
Testing concrete. Determination of ultrasonic pulse velocity
V-C-400 Complete V-Meter MK IV™ System
includes Basic System, Software for PC uploads and Transducers






V-C-401 V-Meter MK IV™ System w/o Software, includes two 54 KHz Transducers





V-C-403 V-Meter MK IV™ Basic System
w/o Software & Transducers






V-C-404 V-Meter MK IV™
(includes Veelinx Software, but no Transducers)









British Standards BS EN 12350-7:2009 Testing fresh concrete. Air content. Pressure methods A-AB-1200 ASTM Type B Pressure Air Meter