The
James Mini R-Meter™
A rugged hand
held field instrument for finding the location,
depth and size
of reinforcement
rebar,
post tension cable, copper and
conduit
in place.
- Used
in conjunction with the
C-CM-4000 Cormap® System for
economical corrosion analysis
-
Rebar Locating Detection and Orientation
-
Measurement
of Concrete Cover
-
Concrete Drilling and Sawing
-
Repair and Rehabilitation
-
Location of Prestressed Cables
-
Contractors
-
Eddy current
design for greater accuracy.
-
Single sensor
for all depth ranges.
-
Daylight
visible display
-
Locates up to
8"¯ (200 mm)
-
Economical
- Store Data for
Later Upload via USB
The
Mini R-Meter™ is a
rugged digital
hand-held field instrument for finding
the location and depth of reinforcement bars in place.
The
Mini R-Meter
™
is light
weight and inexpensive, and
an
easy to use
unit to locate rebar.
Rebar detection of up to 8"¯ (200 mm) can be accomplished when locating
large diameter rebar.
An easy to read display and a 4 hr battery life are just a few advantages that make the Mini R-Meter™ one of the most advanced hand
held units in the field today. The sensor design allows the end user to
quickly
and
accurately
locate and determine concrete cover in corners or hard to reach areas.
The system allows the user to select between Imperial and Metric units,
and the data can be saved in the instrument for posterior uploading to
a computer. The data is saved in the system with the date and time of
the record to help iden
tify
prior test
taken. The Mini
R-Meter™ rebar locator is also capable
of locating no
n-ferrous
metals.
The
eddy current sensor was specifically designed to react with the
presence of currents on the outer surface of metal objects. It is
uninfluenced by small metal particles in the
concrete, whether the concrete is
fresh or hardened,
wet, or dry. The eddy
current
sensor
also allows the unit to locate both ferrous as well as non-ferrous
metals in concrete; thereby finding not only st
eel reinforcing bars accurately, but also tendons,
copper tubing, conduit, and more.
The
latest in microprocessor technology not only conditions the signal from
the sensor
for more accurate and dependable results
,
but also provides the user with the
information they need.
Built
in memory can store over 150 individual data points for later
processing.
Detection and Orientation of Rebar
The exact position and orientation
of
rebar can be measured quickly and
accurately.
Rebar-free areas can be identified for
coring, grinding, resurfacing, or
insertion of new machinery mountings.
The instrument can be used to inspect new structures for compliance with
specifications as well as old structures under modification.
Measurement of
Concrete Cover
The exact position and
orientation of
rebar can be measured quickly and
accurately. Knowing the size of the rebar, concrete cover can be
detected and the distance between the concrete and the surface it will
appear in the easy to read display.
Location of
Metals
Locate any metals, as pipe,
flues, wire, and sheets embedded in
concrete, masonry, or wood.
Identification is possible to a depth of 8 inches.
Location of Pre-Stressed Cables
Locates the position of cables and
lost tendon splices in pre- or post-tension concrete products.
|
Operating Temperature
|
23 deg F to 113 F (- 5 deg C to 45 C)
|
|
Bar Size Calibration:
|
3/8" to 1-3/8" (10 mm to 28 mm)
|
|
Max. Detection Range:
|
8"¯ (with #11 Bar); 200 mm (with #36 mm Bar)
|
|
Power Source:
|
4 AA Batteries
|
|
Battery Life:
|
4 hours continuous operation
|
|
Software:
|
Compatible with Windows 11 / USB Required
|
|
Operating Weight:
|
Less than 3.5 pounds (1.60 Kg)
|
