You are here:Home > Strength Testing
Choose a sub category:
Windsor® Probe Test System Windsor® Pin System Rebound Hammers
Bond Test System Pull Test

Strength Testing

This category of products comprises the range of instruments utilized to evaluate construction material strength. The range of instruments is typically considered to be two parts. The first are non-destructive field tests of compressive strength. The second are tensile field tester systems to either determine the tensile strength of an overlay or bond material, or tensile strength of anchors embedded in the concrete.

The line of products represents the most effective and efficient way to evaluate construction material strength in the field and utilize the latest in technology in order to guarantee accurate results.

Sort By:
Page of 2
Windsor® Probe System Windsor® Pin System Probes
The Windsor® Probe System:  Non Destructive Test System for Concrete Compressive Strength in the field.  Safe, Quick, and Simple to use it is the most effective method of Concrete Compressive Strength Testing on Site.  The System performs equally well on standard and high performance concrete.  Conforms to ASTM C-803 and other International Standards. A unique instrument for measuring the strength of new or existing concrete, mortar and other construction  materials in the field utilizing the established principle of resistance to penetration.   A unique chuck allows testing of mortar joints compressive strength in the field.  Conforms to ASTM C-803. Choose from a case of 75 or a set of 3. Available in Gold for light weight low density concete and Silver for standard density and high performance concrete .
Power Driver Unit, Windsor Driver unit Electronic Measuring Kit Upgrade for Manual System Digital Rebound Hammer
Unit Measures exposed probe length and automatically calculates the average of three probes and the strength of the concrete. Readings can be stored for later retrieval via USB.
Digital Test Hammers for the quick and easy determination of the strength of concrete, and hardness of construction materials.  Digital functions allow greater number of test, leading to better quality tests.  Conforms to ASTM C-805 and other International Standards.
Digital Test Hammer Manual Rebound Hammer Low Impact Manual Rebound Hammer
Digital Test Hammers for the quick and easy determination of the strength of concrete, and hardness of construction materials.  Digital functions allow greater number of test, leading to better quality tests.  Conforms to ASTM C-805 and other International Standards. Manual Test Hammers provide the most economical, quick and easy concrete compressive strength test in the field.  It will also provide an indices of hardness and compressive strength for other construction materials. Conforms to ASTM C-805 and other International Standards. Low Impact Manual Test Hammers provide the most economical, quick and easy concrete compressive strength test in the field for concrete specimens below 100 mm (4 inch) thickness, as well as rock core testing.  It will also provide an indices of hardness and compressive strength for other construction materials, such as ceramics, and tile . Conforms to ASTM C 805, D-5873 and other International Standards.
James Bond Test™ for Testing Tensile Strength Of Overlays James Bond Test™ for Testing Tensile Strength Of Overlays Standard Anchor Test
Measures the Bonding Strength between two layers of existing materials. Determine the adhesion strength of shotcrete, epoxies, paint, asphalt and other repair materials or coatings. Includes 10 - 2" Discs. Extended Warunty for the Bond Test System Determine the adhesion strength of shotcrete, epoxies, paint, asphalt and other repair materials or coatings. Standard Anchor Test System measures the pull strenght of anchors in concrete, wood, masonry, brick and other construction materials.
Super Anchor Test Test Anvil for Calibrating James Rebound Hammers Windsor Probe<sup>®</sup> Manual Depth Gauge
Super Anchor Test System for testing anchor strengths in concrete, wood, masonry, and other construction materials  up to 145 KN (or 32,600 lbF). It is recommended that calibration of the rebound hammers be checked regularly usually after about 2000 strokes.The James Calibration Anvil (W-C-7312) has been designed for just that purpose. Measures the exposed probe length in both 0.050 of an and inch and 0.5 mm. For use with the Windsor Probe System.
50mm ( 2") steel disk for the 007 James Bond 50mm ( 2") Aluminium disk for the 007 James Bond System for testing of bond strength of two layer materials. 9kN Gauge for the James Bond Test™ MK IV and Standard Anchor Test for Tensile Strength Of Anchors
50 mm ( 2") steel disk for the  007 James Bond system for adhesion testing of overlay, and accurate bond strength of mortars, epoxy resin, laminates and other coatings. ASTM Standard Discs Size. 50 mm ( 2") Aluminum disk for the  007 James Bond system for adhesion testing of overlay, and accurate bond strength of mortars, epoxy resin, laminates and other coatings. ASTM Standard Discs Size. 9kN gauge for the James Bond Test™ MK IV for testing of bond strength of two layer materials, and Standard Anchor Test
25KN Gauge for the James Bond Test™ MK IV and Standard Anchor Test for Tensile Strength Of Anchors Oil Refill Bottle for the 007 James Bond system Devcon 5 Min 2 Ton Epoxy for Bond Test
25KN gauge for the James Bond Test™ MK IV for testing of bond strength of two layer materials, and Standard Anchor Test Oil Refill Bottle for the  007 James Bond system for testing of bond strength of two layer materials, adhesion testing, overlay testing, testing of laminates, bond test of mortar repair. BS-1881, ASTM D-4541, ASTM C-1583. Devcon 2 Ton Epoxy for Bond Test
Alignment plate for the James Bond Tester™ MK IV M12 Ring Bolt Adapter Clevis Bolt Fixing Adapter Kit
Alignment plate for the  James Bond Tester™ MK IV for adhesion testing of overlay, and accurate bond strength of mortars, epoxy resin, laminates and other coatings. Includes built in horizontal and vertical level.
Metric Heavy Duty Adapters Metric Threaded Stud Adapter Kit Imperial Threaded Stud Adapter Kit
Metric Threaded Stud Adapter Kit measurements are
64mm, 5mm, 6mm, 8mm 10mm and 12mm 		Imperial Threaded Stud Adapter Kit measurements are
1/4, 5/16, 3/8, 7/16, and 1/2 UNC
Metric Threaded Button Adapter Kit Metric Slotted Button Adapter Kit Imperial Heavy Duty Adapters
Metric Threaded Button Adapter Kit measurements are
64mm, 5mm, 6mm, 8mm 10mm and 12mm 		Metric Slotted Button Adapter Kit measurements are
64mm, 5mm, 6mm, 8mm 10mm and 12mm